Doseuro Rapida 2.0 - Displaying Errors and Protections

XMPI0MTIRPD2ST021 23/24 Ed. 2021
12.2 DISPLAYING ERRORS AND PROTECTIONS
Error codes (stored in parameters D101 to D105)
ERROR CODE
DISPLAY
DESCRIPTION
1
ERR OT
Power module overtemperature
2
ERR OL
Overcurrent
3
ERR EF
"External Fault' (emergency input activation)
4
ERR OV
Overvoltage
5
ERR PF
Motor protection for average cosɸ greater than the set value over a time greater than
5 times the reference parameter
10
ERR cL
“Communication Line” internal error
11
ERR cB
Communication timeout on RS485
Restarting the engine is always subject to removal of the cause of the error.
To restart the device, press the RUN button (automatic mode).