DOTECH CX9230 Series - Parameter Management

CX9230
Recipro/Scroll(Chiller) Controller
REV DATE
R20180403
USERS MANUAL
- 8 -
2.5 Parameter change
If pressing menu button, screen of access code input will be displayed.
Access code is classified into 0000(FREE), 0009(USER), 0100(SERVICE) and 0119(MASTER).
Press enter button for next steps process after input access code using up/down button
Users can view and access of parameters within the scope of authority according to access code. And also, users can
change SERVICE code and MASTER CODE at CONFIG menu.