23
2 MAINTENANCE
TYPICAL PANEL BOX CONFIGURATION
The diagram at right represents a
typical panel box configuration for the
self-contained compactors. The panel
box on your compactor may differ
depending on the model and/or
optional equipment/ controls. Refer to
the ch art bel ow t o id ent ify
components. To order replacement
parts, plea se call our Pa rts
Department at 1-800-633- 8974 or
order online by logging
onto www.parts1stop.com.
For information on programming the
PLC, refer to the following 2 pages.
Reference Part # Description
A 03-0288 Control Transformer-Micron 150VA, 208/230/460-120 VAC
B 03-0959 Distribution Block
C 03-4729 Zelio Smart Relay - PLC
D 03-4852 Zelio Expansion Module - 6 Inputs, 4 Outputs OR
D 03-5483 Zelio Expansion Module - 8 Inputs, 6 Outputs
E 03-4748 IEC Motor Starter
E 03-4753 Overload for 460V OR
E 03-4763 Overload for 230V
F 03-4437 IEC Finger-Safe Terminal Blocks
G Call w/SN Fuse
To Next Page
Loading...