36
7 Configure I/O
Press ►
The Configure I/O screen allows specified events to trigger output relay actions.
▪ NC indicates No Change
▪ C indicates close the relay
▪ O indicates open the relay
These will only have an effect if the Markem-Imaje I/O controller is included in your
printer or you purchase the optional accessory box with an I/O controller included.
Green, Yellow, and Red indicate the relays that are normally connected to the
Green, Yellow, and Red lights on the Markem-Imaje alarm tower, which may be an
optional accessory with your printer as well.
To Next Page
Loading...
