49
10.6 Spitting
Spitting fills the nozzles on the head with ink. If spitting is turned on, it will always
occur on the first print, regardless of the Spit timeout value. After that, it will only occur
after the Spit timeout.
Spit lines are the number of lines to print when the Spit timeout happens. The Spit
timeout is in seconds. The Spit timeout counter starts after the end of the prior image.
Spit distance is the distance from the leading edge of the print image to spit. This
must be less than the distance of the pens from the edge sensor. This setting is per
head, so if the distance is less than the pen-to-sensor distance on some pens spitting
will occur on those pens. If the Spit distance is greater than the distance on other pens,
spitting will not occur.
To Next Page
Loading...
