1.5 Compliance
See inserted Declaration of conformity H72651 for the latest standards and directives. Please contact OPW when
this document is missing
To get the Rack Monitor enclosure with a CE marking following directives are applicable
Used Standards:
IEC/EN 60079-0 2017/18 : Electrical apparatus for explosive gas atmospheres – Part 0 : General requirements
IEC/EN 60079-11 2011/12 : Electrical apparatus for explosive gas atmospheres – Part 11: Intrinsic safety ”i”
IEC/EN 60079-1 2014 : Electrical apparatus for explosive gas atmospheres – Part 1 : Flameproof enclosures ”d”
IEC 60529 : Degrees of protection provided by enclosures (IP Code)
EN 13922 :Tanks for transport of dangerous goods - Service equipment for tanks – Overfill prevention systems
for liquid fuels
Note : Thermistor sensors are not supported
With regard to the Electromagnetic Compatibility the following standards are applied:
EN 55016-2-1 (2014) + A1(2017) : Conducted emission
EN 55016-2-3 (2017) : Radiated emission
EN-IEC 61000-3-2 (2014) & EN-IEC 61000-3-2 (2019) : Harmonics
EN-IEC 61000-3-3 (2013) : Flicker
EN-IEC 61000-4-2 (2009) : ESD
EN-IEC 61000-4-3 (2006) + A1 (2008) + A2 (2010) : Radiated Immunity
EN-IEC 61000-4-4 (2012) : EFT
EN-IEC 61000-4-5 (2014) + A1 (2017) : Surge
EN-IEC 61000-4-6 (2014) : Conducted Immunity
EN-IEC 61000-4-11 (2004) + A1 (2017) : Voltage Dips and Interruptions
To Next Page
Loading...
