EasyManua.ls Logo

Dover OPW 88 Series - Warranty; Approvals; Technical Assistance in the U.S.A.

Dover OPW 88 Series
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rack Monitor 88XX
Document: Installation Manual
Date: January 2024
Version: A.0 subject to change
Page 4 of 30 Installation Manual
Warranty
All parts and products are thoroughly inspected and tested from the time raw material is received at
our plant, until the product is completed. We guarantee that all products are free from defects in materials and
workmanship for a period of one year from the date of shipment. Any product that may
prove defective within said one-year period will, at our option, be promptly repaired, or replaced, or
credit given for future orders. This warranty shall not apply to any product which has been altered in
anyway, which has been repaired by any party other than an authorized service representative, or
when such a failure is due to misuse or conditions of use. We shall have no liability for labor costs,
freight costs, or any other cost or charges in excess of the amount of invoice for the products.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND
SPECIFICALLY, THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.
Approvals
The 88XX OPW-ENGINEERED SYSTEMS Loading Rack Monitor is suitable for
Ex 2(1) G Ex db [ia Ga] IIB T4 Gb
Class I, Division 1, Groups C & D
hazardous locations with intrinsically safe outputs, and housed in an Explosion Proof Enclosure.
All monitors are ATEX / IECEx / QPS approved.
Please consult the factory for the availability of special models.
IECEx: Ex db [Ex ia] IIB T4 Gb
ATEX: Ex db [Ex ia] IIB T4 Gb
Canada: Ex db [Ex ia] IIB T4 Gb; [Ex ia] Class I, Division 1, Groups CD, T4
US: Class 1, Zn 1, AEx db [Ex ia] IIB T4 Gb; [Ex ia] Class I, Division 1, Groups CD, T4
Technical Assistance in the U.S.A.
If at any time during the installation a question arises that is not covered in this Installation Instruction, or with any
other applicable documents referenced, feel free to call the
OPW-ENGINEERED SYSTEMS ELECTRONICS TECHNICAL ASSISTANCE LINE:
In the U.S.A., Call: 800-524-8226
OPW-ENGINEERED SYSTEMS CUSTOMER SERVICE DEPARTMENT:
In the U.S.A., Call 513-932-9114 or 800-547-9393
IN ALL OTHER COUNTRIES: Contact your local OPW-ENGINEERED SYSTEMS agent.
OPW ENGINEERED STSTEMS
9393 Princeton Glendale Road
Hamilton, Ohio 45011
PHONE:: 513-932-9114 or 800-547-9393
FAX: 513-932-9845 or 800-245-8536

Other manuals for Dover OPW 88 Series

Related product manuals