10
6. CONTROL OPERATION
6.1 TEMPERATURE ADJUSTMENT
Select the temperature for the TOP or SOLE by pressing the TOP or SOLE
button, the corresponding display and button will remain intermittent.
Select the desired temperature with the buttons or , and confirm by pressing
the intermittent button.
6.2 SETTING POWER OF FRONT HEAT COMPENSATOR
Select the power of the FRONT-TOP and FRONT-SOLE by pressing the button.
The first time you press it, the % of heat compensation of the FRONT-TOP will appear on
the display of the TOP.
Select the desired % of compensation with the buttons or , and confirm by
pressing the intermittent button.
Then the % of heat compensation of the FRONT-SOLE will appear. Adjust and confirm
by repeating the previous steps.
6.3 SETTING TIMES
Select the desired cooking time in minutes by briefly pressing the button. The
button and the clock display will remain intermittent, set the time if necessary and save
the value by pressing the key again.
6.4 SET DISPLAY UNITS
The user can also set whether the display is in degrees celcius (ºC) or degrees fahrenheit
(Fº).
In order to do so, you must press any of those two keys for 2 seconds. Select
the desired value, then press the button to save and exit the selection of units.
To Next Page
Loading...
