Doyon FC16 - Troubleshooting

A-13
BEFORE CALLING FOR SERVICE
ANSWERS TO MOST FREQUENT QUESTIONS
Questions Solutions
The oven is "ON", but does not function.
• Check the main breaker (the one on the
building panel) and also the breaker located
at the front of the oven (5 amps).
The fan runs but the oven does not heat.
• Check if the thermostat is adjusted high
enough to fire the oven.
Check the power on the heating contactor.
The oven heat too much or does not produce
enough heat.
Measure the temperature with an oven
thermometer and compare it with the
temperature indicated on the thermostat
Made the complete clean up maintenance
procedure.
The conveyor chain is not tight enough.
To tighten:
• Take off the protector on the conveyor motor
located on the sides of the oven. With a
7/16" key, lightly unscrew the 2 screws
having an adjustment on each side;
• Tighten the belt of the conveyor and the
screws;
• Put back the protectors.
The conveyor does not turn.
• Check the 0.5 amps breaker on the side of
the oven.
• If the breaker is "tripped", check if the
conveyor is free from any obstructions
before resetting the breaker.
• Check the conveyor main shaft if the
security clutch is not slipping.
TROUBLESHOOTING