VariZapper
23
We are not responsible for damage caused by this device if due to gross negligence or intent, or any bodily
harm or loss of life due to any negligence or intent.
6.3 Care and Cleaning
The VariZapper requires no special maintenance or cleaning materials. The device may be cleaned with a
soft lint-free cloth. Make sure no moisture gets inside the device. If moisture does enter the case, a technical
inspection is required before the device is used again.
Do not use any alcoholic or abrasive fluids.
6.4 Classification
The VariZapper has been assigned to Class IIa according to the EU Medical Devices Directive.
6.5 Safety Inspections
When used commercially or in business, safety inspections of the VariZapper must be made after 24
months. The safety inspections must include:
1. Verification of the existence of the instruction manual
2. Verification of the completeness of all fittings
3. Visual examination
For mechanical damage
Of all cables and connections for damage
4. Functional Safety
Inspection of the exit signals
Verification of the frequency
These technical inspections may only be made by specifically trained persons and must be documented.
6.6 Repair Service
If there are problems with the device, please contact:
Pierenkemper GmbH
Hoernsheimer Eck 19
D – 35578 Wetzlar
Tel.: + 49 (0) 6441 67923-0
Fax: + 49 (0) 6441 67923-35
www.pierenkemper.eu
To Next Page
Loading...
