DR PRO 26 User Manual

8 DR
®
FIELD and BRUSH MOWER
OFF
Specifications
10.5 HP PRO 26
14.5 HP PRO 26
16.5 HP PRO XL30
20.0 HP PRO XL30
20.0 HP PRO MAX34
Engine
See Engine Owner’s
Manual
See Engine Owner’s
Manual
See Engine Owner’s
Manual
See Engine Owner’s
Manual
See Engine Owner’s
Manual
Fuel Capacity
3 Quarts
2 Gal. (7.57 L)
2 Gal. (7.57 L)
2 Gal. (7.57 L)
2 Gal. (7.57 L)
Cutting Capacity
4' Tall Grass
8' Tall Brush
2" Thick Saplings
4' Tall Grass
8' Tall Brush
2-1/2" Thick Saplings
6' Tall Grass
8' Tall Brush
2-1/2" Thick Saplings
6' Tall Grass
8' Tall Brush
3" Thick Saplings
6' Tall Grass
8' Tall Brush
3" Thick Saplings
Cutting Width
26"
26"
30"
30"
34"
Cutting Height
4"
4"
4"
4"
4"
Speeds
3 Forward
1 Reverse
3 Forward
1 Reverse
3 Forward
1 Reverse
3 Forward
1 Reverse
3 Forward
1 Reverse
Power Steering
No
Yes
Yes
Yes
Yes
Tires
18" x 6-1/2" x 8"
All Terrain
Sealant Filled
18" x 6-1/2" x 8"
All Terrain
Sealant Filled
18" x 6-1/2" x 8"
All Terrain
Sealant Filled
18" x 6-1/2" x 8"
All Terrain
Sealant Filled
18" x 6-1/2" x 8"
All Terrain
Sealant Filled
Machine
Dimensions
80.5” L
30.25” W
48.2” H
80.5” L
30.25” W
48.2” H
83” L
33” W
48.2” H
83” L
33” W
48.2” H
84.5” L
38” W
48.2” H
Machine Weight
268 lbs.
290 lbs.
303 lbs.
325 lbs.
339 lbs.
SETUP for DR FIELD and BRUSH MOWER ATTACHMENTS:
The DR FIELD and BRUSH MOWER is shipped with a Brush Deck. It will also
accept other attachments including the DR SNOWTHROWER, DR CHIPPER
ATTACHMENT, DR LAWNDECK and DR SNOW/GRAVEL BLADE. Setup of
these attachments is quick and easy. Instructions to install and remove the
individual attachments can be found in their user manuals.
Installing the Brush Deck
Tools and Supplies Needed:
 Gloves
 Wire Cutters
1. Cut Cable Tie and remove Detent Pin and Collar from Power Unit (Figure 3).
2. Slide the Power Unit Pin into the Deck Bracket and install the Collar and
Detent Pin (Figure 4).
3. Remove the Belt from the Product Package.
Figure 3
Cable Tie
Collar
Detent Pin
Power
Unit Pin
Collar
Figure 4
Detent Pin
Power
Unit Pin
Deck
Bracket

DR PRO 26 Specifications

General

Cutting Width	26 inches
Start Type	Recoil
Drive Type	Self-Propelled
Mulching Capability	Yes
Bagging Capability	Yes
Side Discharge Capability	Yes
Fuel Capacity	1.5 liters
Deck Material	Steel
Type	Walk-behind
Engine Type	4-cycle
Fuel Tank Capacity	1.5 liters