To Next PageTo Next Page
Need help?Do you have a question about the Dräger Alcotest 5820 and is the answer not in the manual?
General| Device Type | Breath Alcohol Tester |
|---|---|
| Resolution | 0.01 mg/L |
| Operating Temperature | -5 to +50 °C |
| Sensor Type | Electrochemical Fuel Cell |
| Display | LCD |
| Storage Temperature | -20°C to 60°C |
| Interface | USB |
| Calibration Interval | 12 months |
Provides essential safety guidelines for using the product, emphasizing understanding and following instructions.
Explains the meaning of alert icons like WARNING used to highlight important safety information.
Details the various parts and components of the Dräger Alcotest 5820 device.
Specifies the authorized purpose of the Dräger Alcotest 5820 for measuring alcohol concentration.
Outlines necessary conditions and waiting periods before performing a measurement, including calibration.
Guides through the initial setup process, including language, date, time, and measurement unit settings.
Step-by-step instructions for performing an automatic breath test using a new mouthpiece.
Describes how to perform a manual breath test when the subject cannot provide sufficient breath volume.
Explains how to conduct a passive breath test for ambient air or subject breath without a mouthpiece.
Instructions on how to properly switch off the Dräger Alcotest 5820 device.
Details the procedure for safely removing and disposing of the used mouthpiece.
Guide to accessing and navigating the device's menu for settings and information.
Step-by-step guide for replacing the device's battery, including battery type and polarity.
Instructions on how to clean the Dräger Alcotest 5820, with warnings about fluids and cleaning agents.
