Need help?Do you have a question about the Dräger X-am 7000 and is the answer not in the manual?
General| Type | Portable gas detector |
|---|---|
| Display | LCD with backlight |
| Ingress Protection | IP67 |
| Humidity | 10 to 95% RH, non-condensing |
| Sensors | Electrochemical |
| Alarm | Visual, Audible, and Vibration |
| Power Supply | Rechargeable NiMH battery or Alkaline batteries |
| Operating Temperature | -20°C to +50°C |
| Data Logging | Yes |
| Gases Detected | Oxygen (O2), Combustible gases (LEL), Carbon monoxide (CO), Hydrogen sulfide (H2S) |
Overview of the device and explanation of safety symbols used in the manual.
Overview of the menu system, navigation symbols, and structure.
Instructions for switching to menu mode and entering passwords.
List of functions that can be activated or deactivated in the Quick Menu.
Details on instrument status, notices, and faults.
Information on sensor calibration status, including last and next calibration dates.
Details on short-term and time-weighted average exposure values.
Overview of available calibration types: fresh air, mixed-gas, bump test.
Procedure for calibrating the instrument in fresh air to improve zero-point accuracy.
Procedure for calibrating multiple sensors simultaneously using mixed gas.
Step-by-step guide for calibrating and adjusting individual sensors.
Configuration of instrument parameters like leakage mode, time, keys, alarms, and telemetry.
Configuration of individual sensors: gas type, calibration intervals, exposure parameters.
Settings for data logger configuration and exposure evaluation parameters.
Customizing device and sensor settings for specific applications via software.
Comprehensive guide to identifying and resolving instrument faults and error messages.
Basic instructions for cleaning the instrument and its components.
Procedures for inspections, calibration intervals, and replacing sensors, pumps, or power packs.
To Next Page
