47
Performing the measurement
Data input before or after the measurement
Depending on the device configuration, it may be necessary to enter the data before or after
the measurement.
The following examples illustrate the various data input possibilities.
● The data input can be skipped with the provided selection item "Skip" and its selection by
pressing the
key.
Data input using the selection list
Example: Input of the sex of the person to be tested.
● Select the appropriate setting with the and key.
● Press key.
– The selected setting is indicated with . The cursor jumps to the
bottom row "Confirm".
● Press key, the selected setting is applied,
or
● move the cursor back to the setting with the key in order to
modify it.
Data input of free text with the and - keys
Example: Input of the age of the person to be tested.
● Use the and to enter the first digit.
● Press key, the cursor jumps to the second position of the digit
to be entered.
● Enter the second digit with the and key.
● Press key, cursor jumps to the bottom row "Confirm".
● Press key, the setting is applied,
or
● move the cursor back to the setting with the key in order to
modify it.
OK
02823996_01_en.eps
11:53:47
04.12.07
Gender
Skip
Male
Female
Confirm
M
OK
OK
02923996_01_en.eps
11:53:47
04.12.07
Age
Skip
2 _
Confirm
M
M
OK
M
OK
OK
To Next Page
Loading...
