Why does Dräger Test Equipment say 'Not Allowed'?
If your Dräger Test Equipment displays 'Not Allowed', it indicates that the breath sample delivery occurred at a not permitted time, meaning the instrument wasn't ready for measurement (reblow). Instruct the person being tested on the correct delivery of the breath sample, then start a new measurement.
What does 'Readiness to Blow Expired' mean on Dräger Test Equipment?
If your Dräger Test Equipment displays 'Readiness to Blow Expired', it means that the 3 minutes readiness for measurement has expired because breath sample delivery has not started within this time window. Start a new measurement.
What to do if Dräger Test Equipment shows 'Data Input Timeout'?
If your Dräger Test Equipment displays 'Data Input Timeout', it means that there was no data input within 10 minutes despite the prompt. Start a new measurement and enter the data when prompted to do so.
Provides essential safety information and warnings for using the Dräger Alcotest 9510 product.
Explains the alert icons used in the document and their meanings, including CAUTION and NOTICE.
Details the physical components of the Dräger Alcotest 9510 via front, side, and rear views.
Describes the Alcotest 9510's breath alcohol analysis function using infrared and electrochemical sensors.
Specifies the Alcotest 9510 as an evidential breath alcohol measuring instrument for analyzing breath alcohol concentration.
Lists required accessories for operating the Alcotest 9510 instruments.
Covers positioning the instrument, stationary and mobile connections, and energy-saving mode.
Explains how to load available language files onto the instrument for display and menu dialogues.
Details how the screen dims after 30 minutes of inactivity and how to reactivate it.
Provides instructions on safely shutting down the instrument using the Shutdown function.
Stresses that only trained persons should perform measurements and ambient conditions must be met.
Outlines the 20-minute waiting and 10-minute control time required before taking a breath sample.
Describes initiating the measurement process, including test subject data entry.
Explains data entry for operator and test subject, including name and date of birth, using a virtual or external keyboard.
Instructs how to collect a breath sample, including exhaling continuously and evenly into the mouthpiece.
Details the READY status after printing and the readiness for the next measuring cycle.
Explains how to print a copy of the last measuring report at a later date.
Lists and explains various error messages encountered during measurement, such as 'MINIMUM VOLUME NOT ACHIEVED'.
Details the information found in the top part of the measuring report for instrument identification.
Explains how the Alcotest 9510 automatically handles time changes without user interaction.
Describes using the touchscreen and stylus to navigate menu options like Information, Settings, and Maintenance.
Accesses device information and allows configuration of location, time, language, and other settings.
Configures display rotation and printer options, including output selection and number of copies.
Adjusts acoustic signals, reviews error logs, and selects the desired language for the interface.
Manages locations, selects current location for reports, and configures data entry prompts.
Sets the instrument's date and time, and accesses maintenance settings for analysis.
Sets measuring units and enables laboratory control mode for enhanced measurement analysis.
Lists common faults displayed on the screen and their corresponding causes and remedies.
Details specific error codes like ERROR [XXX] and their impact on instrument operation.
Explains messages generated by the Windows CE operating system, such as 'Instrument not ready for operation'.
States inspection requirements and specifies recommended (6 months) and maximum (12 months) maintenance intervals.
Provides instructions for replacing printer paper rolls and instrument fuses.
Instructs on cleaning the instrument surfaces using a damp cloth, avoiding alcohol-based cleaners.
Details operational characteristics, temperature, humidity, pressure ranges, and typical operating data.
Provides specifications for measuring range, concentration, performance, and calibration intervals.
Lists available consumables and accessories for the Dräger Alcotest 9510, with their order numbers.
General| Brand | Dräger |
|---|---|
| Model | Alcotest 9510 |
| Category | Test Equipment |
| Language | English |
To Next Page
