Dräger Atlan A300 - Page 109

Instructions for use | Atlan A300, A300 XL, A350, A350 XL SW 1.0n 109
Operation
7.6.3 Customizing the current view
Waveforms and parameter fields can be customized as follows:
1. Touch the waveform or parameter field.
The Quick setup dialog opens.
2. WARNING
Risk due to inadequate monitoring
National and medical regulations may require certain parameters to be
displayed.
► Always consider the relevant regulations when configuring the screen layout.
For Content (1), select the desired content.
For a list of the possible screen content, see page 184.
3. For Scale (2), select the desired setting.
7.6.3.1 Restoring the current view
The changes to the current view can be canceled.
1. Open the Views dialog.
2. Touch the Restore current view button.
7.6.4 Using loops
Prerequisite: The device has the "Advanced ventilation monitoring" option.
The following loops are available:
– Pressure-Volume loop
– Flow-Volume loop
35686
2
1
Quick setup