Dräger Fabius GS - Right Mounted COSY HBSPS Wall Mounted Installation

Installation of HBSPS (Fabius Tiro) Supplement
Fabius GS/GS premi um/Tiro /OS Supplement Supplement #9038278, Rev. 07 11
Right Mounted COSY
HBSPS Wall Mounted
Installation
Figure 12. HBSPS Installation on Wall Mounted Machine
(Right Mount COSY)
4. On a right mounted COSY machine, route the
power cable for the heater through the trough on
the rear of the cabinet (1 in Figure 12). At the
right hand end of the trough, route the cable into
the cable management cavity on the bottom of
the COSY arm (2 in Figure 12).
5. Plug the connector at the end of the cable into
the mating connector on the rear underside of
the COSY (3 in Figure 12). Orient the connector
so that the red mark on the connector plug aligns
with the red mark on the receptacle.
1
2
3