20 Dräger FPS-COM 7000
Transport
5.3.5 Installing a firmware update
Firmware updates can be installed using the C7C configuration
software. Refer to the "Help" function in the C7C software for additional
information.
Latest updates at www.draeger.com/software
6 Transport
The communication unit can be transported in its original packaging.
Alternatively, it can be fitted onto the full facepiece and transported
with the full facepiece in a suitable transport box.
7Storage
Store the communication unit in a dry, dust-free location. Keep away
from direct sunlight or heat radiation.
Storage temperature see chapter 9 on page 20.
8 Disposal
Dispose of the communication unit according to local waste disposal
regulations.
9 Technical data
Operating temperature -22 °F to +122 °F
(-30 °C to +50 °C)
Operating time Typically 8 hours
depending on level of communication
Ambient conditions
during storage
5 °F to 77 °F
(-15 °C to +25 °C)
10.1 psi to 18.8 psi
(700 hPa to 1300 hPa)
10 to 95 % rel. humidity
Enclosure type NEMA type 6
To Next Page
Loading...
