Dräger Infinity Delta XL - Page 545

DISPLAYS
VF8 DELTA/DELTA XL/KAPPA B-19
Surgical Display Controller
Physical Attributes
Size (H x W x D): 40 x 84 x 170 mm (1.6 x 3.3 x 6.7 in)
Weight: 0.45 kg (1.0 lb.)
Connections
Inputs: IDS Com #2
Outputs: VGA (RGB, video signal, Hsync, Vsync)
Analog output
Connector: 15-pin Dsub
Electrical Specifications
Power source: DC powered, directly from Dräger Medical IDS
Power consumption: < 5 Watts
Mode of operation: Continuous
Video resolution: High, medium, and low resolution
VGA Display
Output resolution:
High resolution mode:1024 x 768
Medium resolution mode:800 x 600
Low resolution mode:640 x 480
Horizontal frequency:
High resolution mode:35.5 kHz
Medium resolution mode:37.9 kHz
Low resolution mode:31.5 kHz
Vertical frequency:
High resolution mode:87 Hz (interlaced)
Medium resolution mode:60 Hz (non-interlaced)
Low resolution mode:60 Hz (non-interlaced)
Video signal level:
1 Vpp
Sync. signal level:
High resolution mode:TTL (positive)
Medium resolution mode:TTL (negative)
Low resolution mode:TTL (negative)
Isolation:
Galvanically isolated from IDS in accordance with IEC 60601-1-1