CONFIGURING THE MONITOR
VF8 DELTA/DELTA XL/KAPPA 2-7
MultiGas
Parameter
Displays a combined O
2
/Agent/N
2
O
parameter box.
NOTE: You can also display or cancel the
MultiGas Parameter box from the O
2
setup menu (see chapter 23, for more
information).
To display the MultiGas parameter
box:
• Click on MultiGas Parameter.
• Click again to toggle ON or OFF.
Split Screen Reserves a portion of the main screen for
display of trend graphs and ventilation
loops.
Click on one of the following:
•OFF
• 60 Min Trends
• 10 Min Trends
• Ventilation
EEG
Channels
Sets number of EEG waveforms
displayed.
• Click on 1, 2, 3, or 4.
Display Options
This submenu allows you to access and modify waveforms and other display features by
configuring the following functions.
Monitoring
Sweep
Speed
Determines the waveform speed. The
higher the sweep speed the quicker the
waveforms are move across the screen.
Click on 6.25, 12.5, 25, or 50 mm/s
Respiratory
Sweep
Speed
Allows you to set the sweep speed for the
respiration waveform independently of
other parameters.
Click on 6.25, 12.5, 25, or 50 mm/s
Pressure
Overlap
Displays up to 4 overlapping IBP
waveforms in a single oversized channel.
Overlapped waveforms share a common
zero point, but each waveform retains the
original scale configuration (see page 14-
14).
•Select ON to display IBP waveforms
in overlapping format.
•Select OFF to cancel display of
waveforms in overlapping format.
Pressure
Common
Scale
Displays pressure waveforms with a
common scale, making it easier to
compare them.
Click on 5, 10, 15, 20, 25, 30, 40, 50,
75, 100, 150, 200, 250, 300 mmHg, or
OFF.
Monitor
Brightness
Sets the brightness of the monitor screen. Click on Auto (ambient light), 20, 40,
60, 80, or 100%.
SC 9015
Brightness
Sets the brightness of the SC 9015.
Help Line
Display
Shows a contextual help line at bottom of
the menu.
•Select ON to display a help line.
•Select OFF to cancel the display of a
help line.
Parameter
Units Display
Displays a unit of measure in the
parameter boxes.
•Select ON to display units.
•Select OFF to cancel the display of
units.
The Main Menu
Menu Item Description Available Settings
To Next Page
Loading...
