EasyManuals Logo
Home>Dräger>Measuring Instruments>Interlock XT

Dräger Interlock XT User Guide

Dräger Interlock XT
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
The Interlock will display the following messages if
the blow pattern is correct
“Test Passed” - the vehicle can be started.
“Test Failed” - the vehicle cannot be started due to
detection of alcohol in the breath sample.
WHAT IF I FAIL THE INITIAL TEST?
After a failed initial breath test due to detection of
alcohol, the vehicle will not start and a “Temporary
Lockout” will be activated.
A countdown will show on the display the amount
of time remaining before another breath test can be
presented.
The lockout time will depend on the amount of
alcohol detected.
Once the temporary lockout period has expired,
repeat steps 3 - 6 of “How do I start the vehicle” to
present another breath test.
HOW DO I KNOW IF I AM BLOWING AND SUCKING
CORRECTLY?
The Interlock will let you know if you are not
presenting a correct sample.
If the unit beeps during the test - stop and look at
the display.
“Blow Longer - You did not blow long enough
“Blow Stronger - You need to blow harder
“Suck after Blow - You did not suck back
correctly
If any of these messages appear press the OK
button and the Interlock will prepare for another
test.
BREATH TESTS WHILST DRIVING
The Interlock will ask for breath tests, “Rolling
Retests”, while you are driving.
1. When a retest is due, the unit will beep and
the yellow light will ash. The display will read
“Retest required – PLEASE BLOW”.

Other manuals for Dräger Interlock XT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Dräger Interlock XT and is the answer not in the manual?

Dräger Interlock XT Specifications

General IconGeneral
BrandDräger
ModelInterlock XT
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals