Dräger VarioGard 2300 / 2320 17
Disposal
7 Disposal
8 Technical data
9 Order list
This product must not be disposed of as municipal waste.
This is indicated by the adjacent symbol. You can return this
product to Dräger free of charge. For information please
contact the national marketing organisations and Dräger.
Environmental conditions
Operation –30 to +40 °C
10 to 90 % rel. humidity
700 to 1300 hPa
Storage 0 to 30 °C for transmitters
10 to 95 % rel. humidity
700 to 1300 hPa
CE mark Electromagnetic compatibility
(Directive 2004/108/EC)
Low voltages
(Directive 2006/95/EC)
Type of protection, housing IP 65, EN 60529
Transmitter
Weight
Plastic housing approx. 0.4 kg
Dimensions with
cable inlet (L x B x H):
Plastic housing 120 mm x 110 mm x 60 mm
Cable inlet M20 x 1.5; 6 mm to 12 mm
Operating voltage 16 to 30 V DC
Power consumption below 0.75 W
Measurement specifications:
Measuring
range
Resolution
of display
Measuring error
IR Ex sensor 0...100 %LEL 1 %LEL < ± 5 % of measured value
IR CO
2
sensor 0...5 % by vol. 100 ppm < ± 5 % of measured value
Designation and description
Order no.
VarioGard 2300 Ex 83 24 832
Measuring range 0 to 100 % LEL CH
4
or LPG
VarioGard 2320 CO
2
83 24 833
Measuring range 0 to 5 vol.-% or 0 to 10000 ppm CO
2
Accessories
Cable inlet M 20 x 1.5 (pack of 10) 83 15 420
Calibration adaptor (VarioGard 23x0) 83 22 015
SW set VarioGard 23x0 (incl. USB PC adapter) 83 22 016
Magnetic wand 45 44 101
To Next Page
Loading...
Need help?
General
