Need help?Do you have a question about the Dräger X-act 5000 and is the answer not in the manual?
General| Brand | Dräger |
|---|---|
| Model | X-act 5000 |
| Category | Water Pump |
| Language | English |
Key safety guidelines for operating the Dräger X-act 5000, covering compliance and proper usage.
Explanation of warning, caution, and notice icons used in the manual for user awareness.
Visual guide to the Dräger X-act 5000 components and their labels.
Details the operational aspects of the Dräger X-act 5000, including its modes and laser classification.
Explains the 'BARCODE OPERATION AIR' mode, laser safety, and measurement initiation.
Step-by-step guide to activate the laser, scan bar codes, and automatic laser shut-down.
Procedure for measuring technical gases, considering gas viscosity and special modes.
Details features in the password menu: calibration, mode selection, language, and password changes.
Description of the function of each key on the Dräger X-act 5000 instrument.
Explanation of LED indicators for different operations and their meanings.
Description of the display segments, matrix, and backlight functions.
Information on battery types, charging, power management, and sleep mode.
Specifies applications for spot check measurements, sampling with tubes, and sampling systems.
Lists ATEX, UL/cUL, CE, and other certifications for the Dräger X-act 5000.
Details information on the product label, including model, part numbers, and safety markings.
Defines the meaning of various icons displayed on the instrument screen.
Steps to prepare the instrument before operation, including charging and power-on sequence.
Guide to navigating menus, selecting options, and configuring settings in the password-protected menu.
Procedure and importance of leak tests; error handling for failed tests.
Guidance for instrument operation, including navigation and exiting functions.
Instructions for performing measurements with tubes in air or technical gases.
Specific procedures for technical gas measurements, including adjustments for gas viscosity.
Steps for sample taking measurements and adjusting flow rates for accuracy.
How to properly switch off the instrument, including automatic flushing.
Instructions for charging the rechargeable battery, including safety warnings and connection details.
Procedure for safely replacing the rechargeable battery, with warnings for explosion hazards.
Steps for replacing alkaline batteries, with warnings for hazardous areas and battery types.
List of errors, causes, remedies, and associated icons/LEDs.
List of potential warnings: leak test, battery status, password, temperature limits.
Table for annual/bi-annual maintenance and instructions for cleaning the instrument.
Specific procedures for calibrating flow rate and replacing the SO3 filter.
Instructions for proper disposal of the product and batteries according to European regulations.
Details environmental conditions, dimensions, weight, and laser specifications.
List of order numbers for the Dräger X-act 5000, power supplies, accessories, and consumables.
List of Dräger-Tubes for specific technical gases with order numbers.
Formal declaration of product compliance with EU directives and relevant standards.
To Next Page
