Dräger X-plore 5500 - Technical Data

Contents | en
Technical manual | Dräger X-plore 5500Dräger X-plore 6000 7
Dräger X-plore 5500Dräger X-plore 6000
Contents
1 Safety-related information................................ 8
2 Conventions in this document......................... 8
2.1 About this document ............................................ 8
2.2 Meaning of the warning notices ........................... 8
3 Maintenance work ............................................. 8
3.1 General notes ...................................................... 8
3.2 Inspection and maintenance intervals.................. 8
3.3 Cleaning and disinfecting..................................... 8
3.4 Leak test .............................................................. 9
3.4.1 Checking for leaks ............................................... 9
3.4.2 Test with sealed exhalation valve ........................ 9
3.4.3 After testing.......................................................... 9
3.5 Replacing the speech diaphragm ........................ 9
3.6 Replacing the exhalation valve ............................ 9
3.7 Replacing the inhalation valve ............................. 9
3.7.1 X-plore 5500 ........................................................ 9
3.7.2 X-plore 6000 series.............................................. 9
3.8 Replacing the front port........................................ 10
3.8.1 Front port ............................................................. 10
3.8.2 Bayonet-type connector (X-plore 5500)............... 10
3.9 Replacing the visor .............................................. 10
3.10 Replacing the inner mask .................................... 10
3.11 Replacing the control valve discs on the inner
mask .................................................................... 10
3.12 Replacing the head harness ................................ 10
4 Storage............................................................... 10
5 Disposal ............................................................. 10