Dräger X-zone 5500 - 18 Technical Data

Technical data
Dräger X-zone 5500 73
18 Technical data
Induction charger:
Dimensions: approx. 490 x 300 x 300 mm
(H x W x D)
Weight:
with battery, 24 Ah approx. 10 kg
Ambient conditions:
During operation
During storage
-20°C to +50°C
-20°C to +70°C
700 to 1300 hPa
max. 95% relative humidity
Alarms:
Visual, 360° LED green life signal;
red alarm signal;
green/red secondary alarm
Audible, 360° 108 dB (A) at 1 m distance
120 dB (A) at 30 cm distance
Battery:
Operating time, 24 Ah
(
 20 °C)
120 hours at 15 minutes per day
and fully equipped X-am 5x00
Charging time, 24 Ah < 14 hours
Charging input XEXT1:
(Ex limits):
U = 15 V, nominal
I = 2.5 A, nominal
U
m
= 30 V
I
m
= 10 A
Pump: up to 30 m of hose
0.5 L/min
Coupling of
devices:
 Up to 25 devices can be
connected on a wireless
network.
 Combined wireless/cable
operation possible.
 Switchable frequencies 433/
868/915 MHz (by
DrägerService) with a typical
range of 100 m in industrial
surroundings (environmental
factors may affect the range).
 Automatic establishment of
wireless connection.
Relay output:
Max. voltage (U
i
):
Max. switching current (I
i
):
Max. continuous current:
Max. switching capacity (P
i
):
For ohmic loads only!
Reactances
No connection with:
20 V
0.25 A
0.25 A
3 W - For ohmic loads only!
C
i
negligible;
L
i
negligible
Capacitive or inductive
loads
Approvals: The approvals are shown on the
rating plate.
Serial no. (year of
construction)
The year of construction is given
by the 3rd letter in the factory
number located on the nameplate:
B=2010, C=2011, D=2012,
E=2013, F=2014, G=2015,
H=2016, etc.
Example: Serial number ARFH-
0054, the 3rd letter is F, so the
year of construction is 2014.
Detection range: see the Dräger
Technical Handbook X-am 5x00
Input
Output
100 to 240 V/50 to 60 Hz 40 W
15 V/2 A
Charging with 0 °C to +40 °C
max. 95% relative humidity
Level of contamination 2
Overvoltage category II
Protection class IP 40