GETTING TO KNOW YOUR BANDSAW
Stock No.76237
Guard [upper door].
Guard [lower door].
Tensioner for saw band.
Upper saw band wheel.
Upper guard latch.
Blade guard adjustment/lock.
Blade guard.
Upper blade guide and back [thrust] bearing.
Saw band.
Table.
Rip fence.
Graduated rip fence rail.
No-volt switch.
Lower saw band wheel.
Drive belt.
Saw band tracking knob.
Table tilt [bevel] adjustment.
Motor.
Base.
Dust extraction port.
Drive belt tensioner.
Lower guard latch
Mitre guide.
Table insert.
Lower blade guide and back [thrust] bearing.
Push stick.
Stock No.76237
- UNPACKING: After removing the packing material, make sure the product is in perfect
condition and that there are no visible damaged parts. If in doubt, do not use the product
and contact the dealer from whom it was purchased.
The packaging materials (plastic bags, polystyrene, etc.), must be disposed of in an
appropriate refuse collection container. These materials must not be left within the reach of
children as they are potential sources of danger.
To Next Page
Loading...
