Vigor130 Series User’s Guide
32
No need to type any other information for PPP mode.
Below shows an example for successful IPv6 connection based on PPPoE mode.
Note: At present, the IPv6 prefix can be acquired via the PPPoE mode connection
which is available for the areas such as Taiwan (hinet), the Netherlands, Australia and
UK.
T
T
S
S
P
P
C
C
Tunnel setup protocol client (TSPC) is an application which could help you to connect to
IPv6 network easily.
Please make sure your IPv4 WAN connection is OK and apply one free account from hexago
(http://gogonet.gogo6.com/page/freenet6-account
) before you try to use TSPC for network
connection. TSPC would connect to tunnel broker and requests a tunnel according to the
specifications inside the configuration file. It gets a public IPv6 IP address and an IPv6
prefix from the tunnel broker and then monitors the state of the tunnel in background.
After getting the IPv6 prefix and starting modem advertisement daemon (RADVD), the PC
behind this modem can directly connect to IPv6 the Internet.
To Next Page
Loading...
Need help?
General
