Vigor130 Series User’s Guide
91
To set a new profile, please do the steps listed below:
1. Click the number (e.g., #1) under Group column for configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Name
Type a name for this profile. Maximum 15 characters are
allowed.
Available Service
Type Objects
All the available service objects that you have added on
Objects Setting>>Service Type Object will be shown in
this box.
Selected Service Type
Objects
Click >> button to add the selected IP objects in this box.
3. After finishing all the settings, please click OK to save the configuration.
To Next Page
Loading...
Need help?
General
