If the connection will be used as a backup internet connection, set the Active
Mode to Failover:
• Select "Any of the selected WAN" if the LTE connection will come online if only
one WAN interface selected goes offline. For instance, in the example below, if
either WAN1 or WAN2 are offline, the LTE WAN interface will become active:
• Select "All of the selected WAN" if the LTE connection will come online only
when all of the WAN interfaces selected are offline:
Click OK to save those changes.
Go to [WAN] > [Internet Access]. Set the Access Mode to 3G/4G LTE Modem
(DHCP Mode) and click the Details Page button:
On the Details for the LTE WAN interface:
To Next Page
Loading...
Need help?
General
