Draytek VigorAP 903 Quick Start Guide

Wall Mounting the DrayTek VigorAP 903
1. Drill two holes on the wall. The distance between the holes shall be 80mm.
The recommended drill diameter is 6.5mm (1/4”).
2. Fit screws into the wall using the included wall plugs
3. Screw the supplied mounting screws into the wall plugs and ensure the fit is
secure
4. Hang the VigorAP directly on the mounting screws and slide it down into
place to securely fit the AP into place
Wall

Draytek VigorAP 903 Specifications

General

Brand	Draytek
Model	VigorAP 903
Category	Wireless Access Point
Language	English