Under normal use of condition, this equipment should be kept a separation distance of
at least 20 cm between the antenna and the body of the user.
Battery Disposal and Removal
The built-in lithium-ion battery contains substances that are hazardous to the
environment. Before disposing of the battery, makes sure the battery is removed by
qualified technicians and discarded at an appropriate recycling facility.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the
battery.
• The battery is to be disposed of safely.
Caution:
• Before removing the battery, disconnect the power and run out the battery as
much as possible.
• Unneeded batteries should be discarded at an appropriate recycling facility.
• Do not expose to high temperature environment to avoid risk for explosion.
• Under abusive conditions, liquid may be ejected from the battery. If contact
occurs, flush with water and seek medical help.
Removal Guide
1. Turn over the robot, use a proper tool to remove the screws on the back of the
robot, and then remove the cover.
2. Unplug the terminals between the battery and PCB board to remove the battery.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
