Dreame P10 Pro - Battery

Dreame Support Team
4
Battery
9. How long can P10 pro operate after fully charged?
Turbo
Med
Eco
With 2-in-1 Crevice
Nozzle
10 min
25 min
60 min
With main
brush
8mins
24min
34min
Mini Motorized Brush
8min
24min
36min
10. How long does it take to fully charge P10 pro?
A: Approximately 3 hours. While charging, LED indicators will flash during charging
and turn solid after fully charged where the circuit disconnects automatically.
11. Can I leave the vacuum and keep it charged all the time?
Yes. After fully charged, the circuit will automatically disconnect to protect the
vacuum from overcharging.
12. What should I do with the batteries if I am not going to use them for a long time?
It is recommended to fully charge P10 pro before storing it in dry and cool places. If
you are going to store it for a long time, we also recommend you to fully recharge it
every 3 months to prevent the battery from over discharging.
13. What is the purpose of the metal contact below the power trigger?
A: It is designed to discharge the static electricity on the surface of the body to
prevent static electricity from hitting the hands. (Completely harmless to human body)
14. Why is the LED indicator off during charging?
1
Check if the battery has already been fully charged.
2
Check if the adapter is properly connected with the vacuum. If the LED indicator
is still off, contact Dreame Support Team.
15. Why did the P10 pro fail to charge?
If charging failure occur, please try the following steps for troubleshooting.
1. Check if the power plug is properly inserted into the socket.
2. Please make sure the socket is on. If not, please turn it on, if charging still fails,
please contact Dreame Support Team.