Dreame Support Team
Accessories
16. How to install the P10 pro vacuum?
A: Please refer to the picture below to install the vacuum:
17. How to clean the dust cup and filtration system?
A: Please refer to below pictures:
18. How often do I need to replace the filter? Is the filter washable?
A: Wash: It is recommended to wash the cyclone module, built-in foam and filter in
every 3-4 month before replacing them with a new one.
Dry: Make sure the filter and foam are fully dried for about 24 hours before
installation and use.
19. How to install the Dust Bin Assembly?
To Next Page
Loading...
