Dreame P10 - How to Use; Working Methods

9
How to Use
Working Methods
Select from two working methods for the vacuum, based on your needs.
Method 1: Discontinuous Cleaning Mode
Press and hold the on/o󽗈 switch to power it on, and release it to stop immediately.
Method 2: Continuous Cleaning Mode (Electronic Lock)
Click the button to switch to Continuous Cleaning Mode and the button is on. Then
release the on/o󽗈 switch to make the vacuum in Continuous Cleaning Mode.
Use the electronic lock to free your 󽗉ngers and avoid 󽗉nger fatigue caused by holding the
switch.
Notes:
• In this mode, brie󽗊y press the switch to suspend the operation or start again，and the
working mode of the vacuum will not change.
• Click the electronic lock again to quit the Continuous Cleaning Mode.
EN