Dreame P10 - Cleaning the Dust Bin & Pre-Filter

12
1
2
Care & Maintenance
3. Remove the pre-󽗉lter. Rotate the cyclone assembly slightly to remove from the dust
bin.
4. Rinse the cyclone assembly, pre-󽗉lter, and dust bin until they are clean. After washing,
air dry for at least 24 hours .
Note:
• It is recommended to clean the dust bin once every month.
• It is recommended to clean the cyclone system and pre-󽗉lter at least once every 3 to 4
months.
Pre-Filter
Cyclone Assembly
Dust Bin
12
6
111
57
210
48
39
24 hrs
EN