4 5
EN EN
Package Contents
Other Accessories
Product Overview
Base Station Ramp
Extension Plate
Laser Safety
Information
Safety Information
·
The laser sensor in this product meets the IEC 60825-1:2014/EN 60825-
1:2014/A11:2021 Standard for Class 1 laser products. Please avoid direct
eye contact with it during use.
Hereby, Dreame Trading
（
Tianjin
）
Co., Ltd. declares that the radio equipment type RLX41CE is in compliance with Directive 2014/53/EU. The full text of the
EU declaration of conformity is available at the following internet address: https://global.dreametech.com
For detailed e-manual, please go to https://global.dreametech.com/pages/user-manuals-and-faqs
CLASS 1 LASER PRODUCT
CONSUMER LASER PRODUCT
EN 50689:2021
·
Make sure the robot is turned off when being transported and kept in its
original packaging if possible.
·
If the robot will not be used for an extended period of time, fully charge it,
then turn it off and store it in a cool, dry place. Recharge the robot at least
once every 3 months to avoid over-discharging the battery.
Batteries and
Charging
Side Brush Power Cord Cleaning Tool
(Stored in the base
station storage bin)
Dust Bag × 2
(Stored in the dust tank)
Main Brush
(pre-installed)
Robot
Base Station
Mop Pad × 2
(pre-installed)
Mop Pad Holder × 2
Cleaning Solution
User Manual Dust Box's Filter
(pre-installed)
To Next Page
Loading...
Need help?
General
