DREAMS Mid Sleeper User Manual

Mid Sleeper
Assembly Instructions
Need assistance?
Call: 0344 292 0000
Dimensions mm Length Width Height
Single
2039 1031 1500
Approximate time to
assemble this product
1
Retain these instructions
for future reference
2 x people recommended to
assemble this product
Do not discard any of the
packaging until you have
checked that you have all the
parts and the pack of fixings.
You will require a cross
head screwdriver
Helpful advise before you begin:
1. We suggest you spend a short time reading through this leaflet
and then follow the simple step by step instructions.
2. If you follow the instructions carefully the end result should be
worth the effort.
3. Do not discard any of the packaging until you have checked that
you have all the parts and the pack of fittings.
4. Assemble this product on a carpet.
5. To ensure an easier assembly, we strongly advise that all fittings
are only finger tightened during initial assembly. Only upon
completion of the assembly should all fixing points be fully
tightened.
6. We recommend a periodic check on all fixing points to make
sure they remain fully tightened.
7. Keep glue and fittings out of children’s reach.
8. Do not use any other tools other than those recommended to
build this product.
9. Please do not use substitute parts. Use only additional or
replacement parts supplied by Dreams Ltd.
10. In the unlikely event that this product has missing or damaged
parts, please call 0344 292 0000 to obtain spares.
Page 1 of 11
IMPORTANT: Read these instructions
carefully before attempting to assemble.
Retain these instructions for future
reference.

DREAMS Mid Sleeper Specifications

General

Type	Mid Sleeper
Mattress Included	No
Bed Size	Single
Assembly Required	Yes
Color	White
Storage Options	drawers

Summary

Assembly Preparation and Advice

Pre-Assembly Guidelines

Read instructions, check parts, assemble on carpet, finger tighten fittings.

Important Safety and Assistance Information

Includes vital warnings, tool requirements, team size, and contact details.

Product Components and Fittings

Parts Checklist

Detailed list of all parts required for assembling the mid sleeper bed.

Fittings Checklist

Comprehensive list of all bolts, screws, nuts, and dowels needed for assembly.

Bed Frame Assembly

Step 1: Initial Frame Construction

Assemble base frame using bolts and screws, finger tightening initially.

Step 2: Attaching Side and Headboard Components

Connect side rails and headboard parts using bolts and dowels.

Step 3: Adding Lower Support Rails

Attach lower support rails to the leg posts using screws and dowels.

Step 4: Securing Main Guardrails

Fix the main guardrails to the frame using bolts and half-round nuts.

Step 5: Connecting Upper Rails and Bars

Connect upper side rails and long bars to the structure.

Step 6: Reinforcing Frame Joints

Secure frame joints with bolts and half-round nuts for stability.

Step 7: Attaching Front Guardrail

Mount the front guardrail, keeping all bolts finger-tight.

Step 8: Ladder Step Assembly

Assemble the ladder steps using bolts and wood dowels.

Step 9: Securing Intermediate Guardrails

Attach shorter guardrails to the frame using bolts and dowels.

Step 10: Finalizing Guardrail Fitment

Secure remaining guardrails, ensuring all bolts remain loose.

Step 11: Adding Top Guardrail Supports

Attach the final guardrail supports, keeping bolts loose.

Step 12: Final Tightening of Frame

Perform the final tightening of all bolts across the assembled bed frame.

Sprung Slat System Assembly

Step 13: Installing Slat Mounting Bolts

Insert bolts for attaching the slat support rails.

Step 14: Securing Sprung Slats

Attach the sprung slats to the frame using screws.

Mattress Compatibility and Safety Guidelines

Notes on mattress size, safety warnings, and product compliance standards.

Care and Maintenance of Your Furniture

Delivery, Airing and Placement

Advice on unpacking, airing the bed, and ensuring a stable surface.

Cleaning and Periodic Checks

Instructions for cleaning the furniture and regularly checking fixings.

Returns Policy and Contact Information

Information on returning items and customer service contact details.