Dremel 3D40-EDU - Unpacking Your 3 D40; Step-by-Step Unboxing Process

11
1. Place box on table, cut tape, and open.
2. Remove top insert.
3. Remove 3D40 and place on table.
4. Open lid and remove top insert.
5. Raise build plate by lifting from both sides.
6. Open door and remove middle insert.
7. Remove bottom insert.
Tip: Keep packaging for future transportation
and storage.
Unpacking
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com