Dremel 3D45 Original Instructions

Original instructions 2
Übersetzung der Originalbedienungsanleitung 34
Traduction de la notice originale 68
Traducción de las instrucciones originales 102
Traduzione delle istruzioni originali 136
Vertaling van de originele gebruiksaanwijzing 170
Oversættelse af betjeningsvejledning 202
Översättning av originalinstruktioner 234
Oversettelse av originalinstruksjonene 266
Käännös alkuperäisistä ohjeista 298
 
364
GB
FR
IT
NL
SV
FI
RU
AR
DE
ES
DA
NO
1619PB2136 09/2017 All Rights Reserved
Please note that the contents of the Quick Start Guide and Instruction Manual may change and
evolve over time. You can access the most up-to-date version online at www.dremel3d.com.

Dremel 3D45 Specifications

General

Layer Resolution	50 - 300 microns
Filament Diameter	1.75 mm
Nozzle Diameter	0.4 mm
Max Extruder Temperature	280 °C
Max Bed Temperature	100 °C
Technology	Fused Filament Fabrication (FFF)
Heated Bed	Yes
Print Speed	Up to 150 mm/s
Enclosed Print Chamber	Yes
Connectivity	USB, Wi-Fi, Ethernet
Supported Filaments	PLA, Nylon, PETG, ECO-ABS
Printer Dimensions	515 x 406 x 403 mm
Display	Full-color touchscreen
Power Requirements	100 - 240 V, 50/60 Hz