Drive 15005L - Packaging and Handling; Unpacking and Inspection; Storage Recommendations

1
Packaging / Handling
Unpacking
1. Check cartons for any obvious damage to packaging or contents. If damage is evident,
contact your local Drive Medical dealer/provider.
2. Remove any lose packaging from the cartons.
3. Carefully remove all components from the cartons.
The Two Cartons will contain the following components:
#15215 HeadSpring and Head Board w/casters
#15216 Foot Spring and Foot Board w/ junction box, 3 motor/actuators,
Hand Pendant Control, Emergency Crank Handle.
Inspection
1. Examine each component carefully for damage, scratches, dents or any other visual damage.
2. Carefully remove Tie Wraps holding power cord, hand pendant and drive shaft.
3. Inspect power cord and plug for cuts or damage.
4. Inspect the junction box and motors for damage, loose connections, cuts or damage to the wires.
5. Ensure motor connections to junction box are connected correctly and secure.
Storage
1. If the bed is not assembled immediately, retain cartons and packaging for storage until assembly is
completed.
2. Store the packaged bed in a dry area.
3. DO NOT place other objects on top of the packaged bed cartons.