To E-mail Address E-mail address or addresses that the alerts should be sent to.
Multiple e-mail addresses should be separated by commas.
From E-mail Address E-mail address from which the alert is sent from.
Mail Server
Server used to send e-mail from. This can be specified as a server name
(ex. smtp.company.com) or a server’s IP address (ex. 127.0.0.1). If you are
unsure, contact your network administrator or your e-mail service provider.
Port
TCP/IP port your server expects SMTP submissions through. By default this
is set to Port 25. If you are unsure, contact your network administrator or
your e-mail service provider.
Authentication
Required if your SMTP server requires authentication. If you are unsure,
contact your network administrator or your e-mail service provider.
Username Username you use to retrieve incoming e-mail.
Password Password you use to retrieve incoming e-mail.
Use SSL
Required if your SMTP server requires an encrypted connection. If you are
unsure, contact your network administrator or your e-mail service provider.
Send Test E-mail Send a test e-mail based on your configuration.
37
To Next Page
Loading...
