Drum HYDRAPAK - Pipe Connection Diagrams

1
2
9
3
4
7
5
6
8
1. Hydrapak
2. Suction Line to Pump
3. Hydraulic Motor
4. Motor Case Drain line (CD)
5. Pressure Line to Motor
6. Hydraulic Pump
7. Power Take O
8. Pressure sensing Line (P) to relief
valve
9. Return line (R)
Fig 3a shows typical installation. Fig. 3b shows a typical tractor/trailer
installation with non-spill couplings.
3.3 Pipe Connection Diagrams
Installation
Fig. 3a Typical Installation
10
10
Fig.3b Tractor / Trailer installation
10. Non-spill Couplings
When installing the hydrapak and hydraulic
system, ensure that the pump and motor are
mounted below the oil level of the Hydrapak
reservoir.
NOTE
Page 8
4991015005 Date:02/18
Hydrapak Installation, Operating & Maintenance Manual