DSC 1832 User Manual

DSC 1832 Quick Guide
https://alpha.adt.com/help/154[11/13/2018 7:40:59 PM]
DSC 1832 - Quick Guide
For a detailed review of the entire system, please view the DSC 1832 manual.
This manual includes instruction variations for LED and LCD keypads. Any instructional differences are
indicated by the use of ‘OR’.
« Help Center
Arm &
Disarm the
System
Battery Bypass
Protected
Areas
Date &
Time
Settings
Chimes &
Beeps
Reset Security
Codes
Trouble
Conditions
Volume
Arm and Disarm
Arm:
To arm all sensors in AWAY mode when you are leaving the premises, press and hold the [AWAY]
button.
To arm in STAY mode when you are not leaving the premises, press and hold the [STAY] button OR
enter your [security code] and do not leave the premises.
To Quick Arm, press [*] + [0]. To enable or disable the Quick Arm feature on your device, enter [*] +
Select

DSC 1832 Specifications

General

Zones	8 on-board, expandable to 32
Partitions	2
User Codes	48
Users	48
Input Voltage	16.5 VAC
Operating Temperature	0°C to 49°C (32°F to 120°F)
Communication Formats	Contact ID, SIA
Power Supply	16.5 VAC, 40 VA
Auxiliary Power Output	12VDC
Communication	PSTN
Wireless Compatibility	Yes (with RF receiver)
Frequency	60 Hz
Humidity	93% RH non-condensing
PGM Outputs	2 (1 x 50mA, 1 x 300mA)