163
13.5 Managing User Accounts
Purpose:
There is a default account in the NVR: Administrator. The Administrator user name is admin and the password is
12345. The Administrator has the permission to add and delete user and configure user parameters.
13.5.1 Adding a User
Steps:
1. Enter the User Management interface.
Menu >Configuration>User
Figure 13. 5 User Management Interface
2. Click the Add button to enter the Add User interface.
Figure 13. 6 Add User Menu
3. Enter the information for new user, including User Name, Password, Level and User’s MAC Address.
Level: Set the user level to Operator or Guest. Different user levels have different operating permission.
• Operator: The Operator user level has permission of Two-way Audio in Remote Configuration and all
operating permission in Camera Configuration by default.
To Next Page
Loading...
General