Managing Partitions
1. Select Options > Partition Status.
2. Enter your access code.
3. Select the partition to loan the keypad to. If the keypad is inactive for more than 30 seconds, it will
return to its original partition.
Global Keypad Operation
Once a valid access code is entered, a global keypad will display the status of any partitions that the user has per-
mission to view. From this overview, you can loan the global keypad to a partition, arm all partitions or disarm
all partitions. The status of each partition will be identified by a partition status icon. For an explanation of par-
tition status icons, see the table below. The global arm and global disarm buttons will arm or disarm all displayed
partitions.
To Loan a Global Keypad to Another Partition:
1. Select Partition Status.
2. Select the partition to loan the keypad to.
Figure 12- Global Keypad Mode
Partition
Status Icon
Description
GREEN BACKGROUND
Partition is ready to be armed
Partition is in exit delay
GRAY BACKGROUND
Partition is not ready to be armed
Partition is in alarm
Partition is in entry delay
Partition is armed
- 24 -
To Next Page
Loading...
Need help?
General