20
User Call Up
When this option is activated, the alarm control panel will call the
downloading computer. The downloading computer must be waiting for
the call in order for downloading to begin.
To start user call up, perform the following:
1. Press [*] [6], then enter a valid access code which has the “System
Master” or “Supervisor” option enabled. The display “System
Functions Menu” should appear.
2. Use the arrow keys (< >) to scroll to the message “User Call Up.”
Press [*] and the panel will call the downloading computer.
NOTE: This option must be enabled by your installer in order for it to
become functional.
To Next Page
Loading...
