24
4.3 Search Using Access Card Numbers
In Section 2.2 “Modify an Existing Code,” two methods were outlined for
searching for existing users: by access code number and by user name.
You may also search by access card number. To do so, perform the
following:
1. Enter [*][5] followed by a Master code.
2. The display will read “Select (0) for User Number Search.” Use the
right arrow (>) key to scroll to the following display:
Select (2) for
User Card Search
Press [2] or [*].
3. Enter the access card number. If the first one or two digits are letters,
press [*] followed by the number key corresponding to that letter (A
= 1, B = 2, etc.).
4. Once you have entered the access card number, press [*]. If the
number is not available, the keypad will sound an error tone and
ask you to enter a new number.
To Next Page
Loading...
Need help?
General
