Quick Setup
1
Plan Plan the installation including all alarm detection devices,
zone expanders, keypads and other required modules.
2
Mount Decide on a location for the alarm panel and secure it to
the wall using suitable mounting hardware.
3
Wire Complete all wiring including modules, zones,
bells/sirens, telephone line connections and ground
connections. Record module serial numbers on page 20.
4
Power Connect the battery and power up the system. The battery
must be connected.
5
Enroll
First
Keypad
Hardwired: Wire the keypad to the Corbus, power up the
alarm panel then press any button on the keypad.
Wireless: Wire the HSM2Host to the Corbus, then
power up the alarm panel and a wireless keypad. Press
any button on the keypad to enroll it. The HSM2Host is
then enrolled on the alarm panel. Alternately, enroll an
RF keypad.
6
Enroll
modules
[*][8][Installer Code][902] subsection [000]. Press [*] to
begin auto-enrollment. Module slots are automatically
assigned. Use scroll keys to view slots. Change slot by
typing a 2-digit number.
7
Enroll
wireless
devices
[*][8][Installer Code][804] subsection [000]. Note: An
HSM2HOST or RF keypad must be enrolled first.
8
Program Basic programming: [*][8][installer code] [001]/[002]>
Zone Type/Zone Attribute [005]>[001] Partition 1
Timers: – Entry Delay 1 – Entry Delay 2 – Exit Delay
[301]>[001] Phone #1 [310]>[000] System Account
Code
9
Test Test the panel completely to ensure that all features and
functions operate as programmed. – [901] Walk Test –
[904][000] Wireless Placement Test
Compatible Devices
Throughout this document, x in the model number represents the
operating frequency of the device as follows: 9 (912-919 MHz), 8
(868MHz), 4 (433MHz).
Note: Only models operating in the band 912-919 MHz are UL/ULC
listed where indicated. Only
UL
approved devices are to be used with
UL/ULC listed systems.
Table 1-1 Compatible Devices
Modules
Wireless keypads: HS2LCDWFx
UL
HS2LCDWFPx
UL
HS2LCDWFPVx
UL
Hardwired keypads with 2-way wireless integration
module:
HS2LCDRFx
UL
HS2LCDRFPx
UL
HS2ICNRFx
UL
HS2ICNRFPx
UL
Hardwired keypads: HS2LCD
UL
HS2LCDP
UL
HS2ICN
UL
HS2ICNP
UL
HS2LED
UL
Touchscreen Keypad HS2TCHP
Note: For ULC-s559 Listed applications
the HS2TCHP touch screen keypad is for
supplementary use only.
2-way wireless integration module: HSM2HOSTx
UL
8-zone expander: HSM2108
UL
8-output expander: HSM2208
UL
Power supply: HSM2300
UL
4 high current output expander: HSM2204
UL
Alternate communicator: 3G2080
UL
3G2080R
UL
TL280
UL
TL280R
UL
TL2803G
UL
TL2803GR
UL
PCL-422
UL
Hardwired Devices
2-wire smoke detectors: FSA-210x
UL
FSA-210xT
UL
FSA-210xS
UL
FSA-210xST
UL
FSA-210xLST
UL
FSA-210xR
UL
FSA-210xRT
UL
FSA-210xRS
UL
FSA-210xRST
UL
FSA-210xLRST
UL
y= A, B, or C
A: ULC listed models
B: UL listed models
C: European and Australian models
4-wire smoke detectors: FSA-410x
UL
FSA-410xT
UL
FSA-410xS
UL
FSA-410xST
UL
FSA-410xLST
UL
FSA-410xR
UL
FSA-410xRT
UL
FSA-410xRS
UL
FSA-410xRST
UL
FSA-410xLRST
UL
y= A, B, or C
A: ULC listed models
B: UL listed models
C: European and Australian models
CO detectors: CO-12/24
UL
12-24SIR
UL
FW-CO12
UL
FW-CO1224
UL
CO1224
UL
Wireless Devices
Wireless PG smoke detectors PGx926
UL
Wireless PG smoke and heat detector PGx916
UL
Wireless PG CO detector: PGx916
UL
Wireless PG PIR motion detectors: PGx904(P)
UL
Wireless PG PIR + camera motion detector PGx934(P)
UL
Wireless PG curtain motion detector PGx924
UL
Wireless PG dual tech motion detector PGx984(P)
Wireless PG mirror motion detector PGx974(P)
UL
Wireless PG outdoor motion detector PGx994
UL
Wireless PG glass break detector: PGx912
Wireless PG shock detector: PGx935
UL
Wireless PG flood detector: PGx985
UL
Wireless PG temperature detector (indoor use): PGx905
UL
Outdoor temperature probe (requires PGx905) PGTEMP-PROBE
Wireless PG keys: PGx939
UL
PGx929
UL
Wireless PG panic key PGx938
UL
Wireless PG 2-button key PGx949
UL
Wireless PG sirens: PGx901
UL
PGx911
UL
Wireless PG repeater: PGx920
UL
Wireless PG door/window contacts: PGx975
UL
Wireless PG door/window contact w/ AUX PGx945
UL
Central Station Receivers
SG-System I, II, III, IV
Enclosures
PC5003C, PC4050CR (ULC Fire Monitoring), PC4050CAR (UL Commercial Burg), CMC-1(UL
Commercial Burg) Other enclosures are available to suit a variety of system configurations.
Alarm Controller v1.1 Installation Guide
This installation guide provides the basic wiring, programming and troubleshooting information required to install the PowerSeries Neo alarm controller. Use this guide in conjunction with the PowerSeries Neo
Reference Manual available online from the DSC website at www.dsc.com. Available models: HS2016, HS2032, HS2064, HS2128.
WARNING: This manual contains information on limitations regarding product use and function and information on
the limitations as to liability of the manufacturer. The entire manual should be carefully read.
To Next Page
Need help?
General
