DSC PC3000 Installation Manual

31
PC3000 Version 7.7
[20] Zones 1 to 8 Bypass Mask Page 19
Default
On Zone Light 1
On
Zone Light 2
On Zone Light 3
On Zone Light 4
On
Zone Light 5
On Zone Light 6
On
Zone Light 7
On Zone Light 8
[21] Zones 9 to 16 Bypass Mask Page 19
Default
On Zone Light 1
On
Zone Light 2
On Zone Light 3
On
Zone Light 4
On Zone Light 5
On Zone Light 6
On
Zone Light 7
On Zone Light 8
[22] System Times Page 19
Default
030 Entry Delay Time (in seconds)
120
Exit Delay Time (in seconds)
004 Bell Cut-off Time (in minutes)
030 AC Failure Transmission Delay (in minutes)
050
Normal Loop Response Time (x 10 ms)
030 Test Transmission Cycle Time (in days)
[23] System Clock Times Page 19
Default
9999
Automatic Arming Time of Day
9999 Test Transmission Time of Day
Note:
If zone light is on, the zone can be
bypassed using the [ Q ] [1] command.
Note:
If zone light is on, the zone can be
bypassed using the [
Q ] [1] command.
Notes:
1.Valid entries are: 001 to 255.
2.Do not enter “000” - it is not a valid entry.
Enter 4 digits: 00 to 23 hr, 00 to 59 min.
If not used, leave at the factory default
settings.
WWW.DIYALARMFORUM.COM

DSC PC3000 Specifications

General

Brand	DSC
Model	PC3000
Category	Security System
Language	English