DSC PC3000 Installation Manual

34
PC3000 Version 7.7
[31] Access Code Group A Assignment Page 21
Default
On Zone Light 1
On
Zone Light 2
On Zone Light 3
On Zone Light 4
On
Zone Light 5
On Zone Light 6
On
Zone Light 7
On Zone Light 8
[32] Access Code Group B Assignment Page 21
Default
On Zone Light 1
On
Zone Light 2
On Zone Light 3
On Zone Light 4
On
Zone Light 5
On Zone Light 6
On
Zone Light 7
On Zone Light 8
[33] Communicator Call Direction Options Page 22
Default
1 Zones Group A Alarms and Restorals
1
Zones Group B Alarms and Restorals
1 Access Codes Group A Openings and Closings
1 Access Codes Group B Openings and Closings
1
Priority Alarms and Restorals
1 Maintenance Alarms and Restorals
Enter:
[0] No transmissions for this group
[1] Call 1st phone number back up to 2nd (becomes 1st number only, when section [18] item [7] is on)
[2] Call 2nd phone number only
[3] Always call both phone numbers
Note: If zone light is on that access code is assigned to
Group A.
Codes 9 to 16 are permanently assigned to Group A.
Note: If zone light is on, that access code is assigned
to Group B.
If light is on in both sections, the code is common to
both sides and will arm or disarm the entire system.
WWW.DIYALARMFORUM.COM

DSC PC3000 Specifications

General

Brand	DSC
Model	PC3000
Category	Security System
Language	English